CONSOLIDATED MR-68-2RS bearing,MR-68-2RS Size:**2.0000mm--BEARINGPOWER Co.,Ltd.
HOME -- CONSOLIDATED bearing -- NEEDLE BEARINGS -- CONSOLIDATED MR-68-2RS bearing
Dimensions (inch)F4.2500

Without Inner Race & 2 Seals 2RS

D5.2500
B2.0000
Approx.
Wgt. lbs
3.995
Appropriate Inner RaceMI-60
InterchangeMcGillMR-68-SS
RBC-
Torrington-
1) Material - Outer races, inner races and rollers are made from 52100 steel and hardened to Rockwell hardness 60-64 RC. These bearings are equipped with stamped steel cages.
2) Lubrication - Outer races have an external centered oil groove and one oil hole. Inner races have an internal centered oil groove and one oil hole.
3) For applications where the bearing is run directly on the shaft, no inner race is required. The shafthardness should be 60 Rockwell C scale.
4) In order to adapt the seals, a narrow roller is used. Therefore, the load ratings are equivalent to the narrow type - i.e. MR-16-2RS load equal to MR-16 N.
Purchase the CONSOLIDATED MR-68-2RS Please fill in the following

Title:

Email:

Tel:

Content:

Verification code:

Hot number:NSK 07087/07196 SKF 7005 CE/HCP4AL SKF 71903 ACE/P4AH KOYO 7072B NBS 81106TN SKF C30/560M AST GEC360XS-2RS KOYO MHKM2830 SKF P 40 WF ISO SL182207 SKF VKBA 1301 SKF SDAF-224 FAG C2207V STEYR NUP2305 New Departure Z9507 Timken 202KLLG3 Timken 3381/3320 NSK 47896/47820 SKF 6010/HR11TN NTN 6317LLU CX 71828 ATBP4 NSK 7205 A Timken JP10049/JP10010B ISO KBK14X18X14,5 KOYO KDA160 KOYO NJ305 R&M LLRJN21/2 FAG GS81176 CONSOLIDATED NU-2909E CONSOLIDATED FT-39