CONSOLIDATED MR-20-2RS bearing,MR-20-2RS Size:**1.2500mm--BEARINGPOWER Co.,Ltd.
HOME -- CONSOLIDATED bearing -- NEEDLE BEARINGS -- CONSOLIDATED MR-20-2RS bearing
Dimensions (inch)F1.2500

Without Inner Race & 2 Seals 2RS

D1.7500
B1.2500
Approx.
Wgt. lbs
.380
Appropriate Inner RaceMI-16
InterchangeMcGillMR-20-SS
RBCSJ-7235-SS
TorringtonHJ-202820-2RS
1) Material - Outer races, inner races and rollers are made from 52100 steel and hardened to Rockwell hardness 60-64 RC. These bearings are equipped with stamped steel cages.
2) Lubrication - Outer races have an external centered oil groove and one oil hole. Inner races have an internal centered oil groove and one oil hole.
3) For applications where the bearing is run directly on the shaft, no inner race is required. The shafthardness should be 60 Rockwell C scale.
4) In order to adapt the seals, a narrow roller is used. Therefore, the load ratings are equivalent to the narrow type - i.e. MR-16-2RS load equal to MR-16 N.
Purchase the CONSOLIDATED MR-20-2RS Please fill in the following

Title:

Email:

Tel:

Content:

Verification code:

Hot number:SNR 33109A KOYO 3490/3420 FBJ 4312 ISB 6304-RS NACHI 7026CDT KOYO HAR924CA INA GE160-DO ISO MR105ZZ SIGMA N 310 CYSD NNU4920K/W33 CX SA 20 SKF NA6901 MRC 209-SFFG SKF NJ212 SKF BSD3572G CX 1315K Timken 122W ISB 239/900 SKF 32034X KOYO 590/592A INA CSXC080 MPZ K12x16x13 NTN M281649D/M281610/M281610DG2 CX NF1984 FBJ NJ216 CX NNU6040 NKE RASEY16 FAG 29426E STEYR TN305 KAYDON KC050CPO