CONSOLIDATED MR-12-2RS bearing,MR-12-2RS Size:**1.0000mm--BEARINGPOWER Co.,Ltd.
HOME -- CONSOLIDATED bearing -- NEEDLE BEARINGS -- CONSOLIDATED MR-12-2RS bearing
Dimensions (inch)F.7500

Without Inner Race & 2 Seals 2RS

D1.2500
B1.0000
Approx.
Wgt. lbs
.171
Appropriate Inner RaceMI-8
InterchangeMcGillMR-12-SS
RBCSJ-7154-SS
TorringtonHJ-122016-2RS
1) Material - Outer races, inner races and rollers are made from 52100 steel and hardened to Rockwell hardness 60-64 RC. These bearings are equipped with stamped steel cages.
2) Lubrication - Outer races have an external centered oil groove and one oil hole. Inner races have an internal centered oil groove and one oil hole.
3) For applications where the bearing is run directly on the shaft, no inner race is required. The shafthardness should be 60 Rockwell C scale.
4) In order to adapt the seals, a narrow roller is used. Therefore, the load ratings are equivalent to the narrow type - i.e. MR-16-2RS load equal to MR-16 N.
Purchase the CONSOLIDATED MR-12-2RS Please fill in the following

Title:

Email:

Tel:

Content:

Verification code:

Hot number:NKE 6003 SKF 6207-2RZTN9/HC5C3WT FBJ 693 NTN CRO-4303LL AST GEH400HT KOYO MJ-881 SKF NA 4911 NKE RMEO100 NTN T-LM654642/LM654610 FAG L10VA400 SKF H320 RIV 17A CONSOLIDATED 22209 CONSOLIDATED 30264 CONSOLIDATED 30x47x7mm KOYO 24188RK30 Timken 340RJ30 NSK 42688/42620 NSK 53315 ZEN 6230 NSK EE722110/722185 CX HM803149/10 SKF NKIB 5901 ISO NU39/1060 LS SAZP11S NACHI UC214 FAG 53232U SKF LS5578 CONSOLIDATED NAO-40x55x17 CONSOLIDATED TN-509