AST S3PPG4 bearing,S3PPG4 Size:9,525*22,225*mm--BEARINGPOWER Co.,Ltd.
HOME -- AST bearing -- Bearing Units -- AST S3PPG4 bearing

(dimensions in inches)

Bearing Type - with snap ring

Bore Dia (d) - 0.3750

Outer Dia (D) - 0.8750

Outer Width (Bo) - 0.2812

Inner Width (Bi) - 0.5625

Dynamic Load Rating (Cr) - 575

Static Load Rating (Cor) - 305

Collar Width (i) - 0.2500

Bearing Collar Outside Dia. (J) - 0.7810

Bearing Collar Set Screw (L) - 8-36 UNF

Snap Ring Dia. (G) - 0.9840

Snap Rinf Location (Sd) - 0.9000

Snap Ring Thickness (I) - 0.0260

Material - 52100 chrome steel, or equivalent

The bearing comes with a retaining ring.

Bore tolerance = +0000" / -.0005"

Outside diameter tolerance = .0000" / -.0004"

Outer race width tolerance = .000" / -.005"

Inner race width tolerance = .000" / -.005"

All tolerances ABEC 1 except where noted.

Two rubber seals

Mating shaft recommended tolerance: +.0000" / -.0005"

Purchase the AST S3PPG4 Please fill in the following

Title:

Email:

Tel:

Content:

Verification code:

Hot number:NKE 22308-E-K-W33+AH2308 NACHI 7036DT SKF 33112/Q CRAFT 61900 SKF 71814 ACD/HCP4 KOYO DC4840VW NTN HSB911C KOYO J-55 KOYO K35X42X18 INA SL182219 NACHI UCTX12 SKF YAR 209-112-2FW/VA228 FAF 5220WBR RBC S-128-LW CONSOLIDATED 6226-R FAG 222S.308 NACHI 5218N ISB 628-RZ CX NUP1013 CYSD QJF208 FAF W207PPG FAG 32960 SKF SAF609 SKF HMV47E McGill MR-24 STEYR NJ2340E SKF E10 CONSOLIDATED 6315 CONSOLIDATED S-3614-ZZ CONSOLIDATED SS1635-2RS

Previous:AST S3PPG16 Bearing Units ---- Next:ZEN S4200 Bearing Units

Return to HOME