AST S3PP4 bearing,S3PP4 Size:9,525*22,225*mm--BEARINGPOWER Co.,Ltd.
HOME -- AST bearing -- Bearing Units -- AST S3PP4 bearing

(dimensions in inches)

Bearing Type - no snap ring

Bore Dia (d) - 0.3750

Outer Dia (D) - 0.8750

Outer Width (Bo) - 0.2812

Inner Width (Bi) - 0.5625

Dynamic Load Rating (Cr) - 575

Static Load Rating (Cor) - 305

Collar Width (i) - 0.2500

Bearing Collar Outside Dia. (J) - 0.7810

Bearing Collar Set Screw (L) - 8-36 UNF

Material - 52100 chrome steel, or equivalent

The bearing does not come with a retaining ring.

Bore tolerance = +0000" / -.0005"

Outside diameter tolerance = .0000" / -.0004"

Outer race width tolerance = .000" / -.005"

Inner race width tolerance = .000" / -.005"

All tolerances ABEC 1 except where noted.

Two rubber seals

Mating shaft recommended tolerance: +.0000" / -.0005"

Purchase the AST S3PP4 Please fill in the following

Title:

Email:

Tel:

Content:

Verification code:

Hot number:NACHI 23272E NACHI 22252EK CX 241/630 K30CW33+AH241/630 NKE 3204-B-2RSR-TV SIGMA 3309 Timken 369A/363D+X1S-369A FAG 4216-B-TVH KOYO 52315 SKF 6003/VA201 NKE 6304-Z-N ISO NH326 FAG 70/800MP.UA ADR X1/4ZZ SKF 238210D-2LS CONSOLIDATED XLS-33/4 SNR 6208ZZD22 NACHI 7306C INA EGBZ2816-E40 SKF NJ 310 ECPH FBJ NJ2210 SIGMA NJG 2309 VH SNR UCFLZ206 IKO TAM 1620 SNR UK309+H-24 HOFF R560L HOFF R317L RIV 18BPPL CONSOLIDATED RMS-30-LL CONSOLIDATED K-32x36x15 CONSOLIDATED HK-1518-RS