AST GAC25N bearing,GAC25N Size:25*47*15mm--BEARINGPOWER Co.,Ltd.
HOME -- AST bearing -- Plain Bearings -- AST GAC25N bearing

(dimensions in mm)

Bearing Type - steel-on-PTFE plastic

Bore Dia (d) - 25.0000

Outer Dia (D) - 47.0000

Width (B) - 15.0000

Outer Width (Bo) - 14.0000

Inner Width (Bi) - 15.0000

Dynamic Load Rating (Cr) - 20,000

Static Load Rating (Cor) - 32,000

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 1.000

Max. housing corner radius, or 45 deg. chamfer (ch) - 1.000

Spherical Diameter (dk or Dk) - 42.000

Mis-alignment Angle (a deg.) - 2.5

Spherical Center Location (S) - 1

Weight (g) - 148.00

Material - 52100 Chrome steel, or equivalent

This spherical plain bearing has a PTFE plastic liner, the inner ring is hard chrome plated on the sliding surface.

A single bearing can only accept axial loading in one direction. A pair of opposing bearings are required for radial loading and bi-direction axial loading.

The bearing must be protected from dirt and contamination.

Purchase the AST GAC25N Please fill in the following

Title:

Email:

Tel:

Content:

Verification code:

Hot number:Timken 3386/3320-B NSK 35BER29HV1V NKE 61844 CX 61901-2RS KOYO 7248B KOYO ALP206-20 FAG B7244-C-T-P4S NTN NN3952KC9NAP4 SKF NU 2318 ECJ NKE NUP2219-E-MPA ISO UCPX15 IKO AZ9012022 SKF SN517 New Departure 93L03 CONSOLIDATED 1318 CX 292/630 M FBJ 32012 FAG 3802-B-2RSR-TVH NTN 5T-6204PX32V85 KOYO DC5020N ILJIN IJ132016 NACHI NF 221 SIGMA NJ 2218 NACHI NJ 256 NKE NJ2308-E-MPA ZVL PLC66-10-2 RIV 15AK Rollway AT-742 SKF HK2514RS SKF 5309ENR